黑松山资源网 Design By www.paidiu.com

前言

关于Linux系统的HugePages与Oracle数据库优化,可以参考熊爷之前的文章,相关概念介绍的非常清晰:

Linux大内存页Oracle数据库优化

本文旨在Linux系统上快速配置HugePages

测试环境:RHEL6.8 + 512G物理内存;Oracle 11.2.0.4 SGA=400G.

1.设置memlock无限制

在/etc/security/limits.conf配置文件中,设置oracle用户memlock无限制:

vi /etc/security/limits.conf

oracle soft memlock unlimited
oracle hard memlock unlimited

2.设置合理的vm.nr_hugepages

在/etc/sysctl.conf配置文件中,设置合理的vm.nr_hugepages值。

运行MOS 401749.1提供的hugepages_settings.sh脚本,直接可以得到建议值。

hugepages_settings.sh脚本内容:

#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support 
# http://support.oracle.com

# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support 
(http://support.oracle.com) where it is intended to compute values for 
the recommended HugePages/HugeTLB configuration for the current shared 
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and 
you should accommodate this while calculating SGA size.
* In case you changes the DB SGA size, 
as the new SGA will not fit in the previous HugePages configuration, 
it had better disable the whole HugePages, 
start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup 
(See Doc ID 749851.1)
* The shared memory segments can be listed by command:
# ipcs -m


Press Enter to proceed..."

read

# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`

# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
echo "The hugepages may not be supported in the system where the script is being executed."
exit 1
fi

# Initialize the counter
NUM_PG=0

# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
if [ $MIN_PG -gt 0 ]; then
NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
fi
done

RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`

# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
echo "***********"
echo "** ERROR **"
echo "***********"
echo "Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
exit 1
fi

# Finish with results
case $KERN in
'2.2') echo "Kernel version $KERN is not supported. Exiting." ;;
'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
esac

# End

直接运行脚本即可得到对应的建议:

--当启动的实例设置SGA_MAX_SIZE=12G,给出建议:
Recommended setting: vm.nr_hugepages = 6148

--当启动的实例设置SGA_MAX_SIZE=400G,给出建议:
Recommended setting: vm.nr_hugepages = 204805

--当没有启动实例时,会报错提示:
***********
** ERROR **
***********
Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured

我这里将建议值vm.nr_hugepages = 204805追加到/etc/sysctl.conf配置文件中,然后执行sysctl -p生效配置。

3.确认HugePages设置成功

查看关于HugePages的信息,注意HugePages_Total值是之前设置的204805:

grep Huge /proc/meminfo

# grep Huge /proc/meminfo 
AnonHugePages: 0 kB
HugePages_Total: 204805
HugePages_Free: 168475
HugePages_Rsvd: 168471
HugePages_Surp: 0
Hugepagesize: 2048 kB

数据库在启动时,对应alert日志中会有“Large Pages Information”内容:

Wed Nov 14 14:38:12 2018
Starting ORACLE instance (normal)
************************ Large Pages Information *******************
Per process system memlock (soft) limit = UNLIMITED

Total Shared Global Region in Large Pages = 400 GB (100%)

Large Pages used by this instance: 204801 (400 GB)
Large Pages unused system wide = 4 (8192 KB)
Large Pages configured system wide = 204805 (400 GB)
Large Page size = 2048 KB
********************************************************************

至此可以确认HugePages设置成功。

总结

以上就是这篇文章的全部内容了,希望本文的内容对大家的学习或者工作具有一定的参考学习价值,如果有疑问大家可以留言交流,谢谢大家对的支持。

黑松山资源网 Design By www.paidiu.com
广告合作:本站广告合作请联系QQ:858582 申请时备注:广告合作(否则不回)
免责声明:本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除!
黑松山资源网 Design By www.paidiu.com

《魔兽世界》大逃杀!60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容,新游玩模式《强袭风暴》即将于3月21 日在亚服上线,届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕,并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时,他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中,玩家将会进入一个全新的海盗主题大逃杀式限时活动,其中包含极高的风险和史诗级的奖励。

《强袭风暴》不是普通的战场,作为一个独立于主游戏之外的活动,玩家可以用大逃杀的风格来体验《魔兽世界》,不分职业、不分装备(除了你在赛局中捡到的),光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式,玩家在加入海盗主题的预赛大厅区域前,可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹,《巨龙崛起》和《魔兽世界:巫妖王之怒 经典版》的玩家都可以获得奖励。